$19.99 – $59.99
Solo Seal is suitable for interior or exterior use on unglazed tile, grout, all porous natural and fabricated stone, and unfinished wood (can also be used on all masonry surfaces). It is suitable for the above-grade applications.
Read the entire label before using it.
Ensure surface to be treated is clean free of dirt and debris and does not have standing water.
Apply from the spray bottle for small applications, and for larger applications apply with a low-pressure pump type sprayer (battery-powered 15-25 psi pump is suitable as well) with a fan style tip.
On vertical surfaces spray from the top down and flood the surface until the excess runs down 6-8 inches below spray pattern. Areas, where product soaks in very quickly, should be retreated within 2 minutes. A wet on wet reapplication is suggested within 2-6 minutes to ensure complete coverage.
On a horizontal surface apply a single flood coat sufficient that the surface remains wet for 3-5 minutes areas where product soaks in very quickly should be re-treated within 2 minutes. A wet on wet reapplication is suggested within 2-6 minutes to ensure complete coverage. Avoid puddling or ponding on horizontal surfaces as it may cause surface darkening.
After the product has been allowed to soak in for 5-10 minutes wipe off any excess product to avoid darkening or formation of films.
Protect adjacent surfaces from overspray.
Should not be allowed to dry on glass or glazed surfaces as it may leave a film.
Rinse thoroughly from surrounding vegetation.
It contains siloxane and siloxane has been found to cause minor skin irritation.
Do not dilute or alter the product.
Solo Seal is environmentally friendly and water-based. It has very low V.O.C.’s and has almost no application odor.