$49.99 – $219.00
Prep & Profile is "Shotblast in a Bottle!"
Bring soiled concrete back to life the easier way without man-handling equipment in unhealthy air.
Rids concrete of dirt and grime with the added benefit of leaving a 2-4 mil surface profile for complete preparation for laying sealers, paints, and coatings. A powerful water base that saves time and money.
Read the entire label before using it. Use only as directed. Before applying, it is recommended that preliminary tests be carried out to determine usage and to test the effectiveness of the treatment. Apply solution liberally on the surface to be prepped with a low-pressure garden style pump sprayer, or a plastic sprinkling can. Use a stiff-bristled brush (nylon deck brushes are suggested) to lightly spread product evenly over the surface, and allow the solution to dwell for 5 minutes. After 5 minutes, agitate the surface with the stiff-bristled brush in a back and forth motion going north to south and then east to west to assure complete surface agitation. Allow the agitated solution to dwell on the surface an additional 5-8 minutes and rinse thoroughly. Allow surface to completely dry before analyzing results. Repeat process as needed. DO NOT ALLOW SOLUTION TO DRY ON THE SURFACE! Repeat the application process as needed to reach desired results.
Clean tools, equipment with fresh water. Water flushes all primary surfaces, shrubbery, sidewalks, blacktop, asphalt, glass, equipment, and all adjacent surfaces.
For specific information regarding safe handling of this material refer to the Material Safety Data Sheet.