Application Instructions

1. Read the entire label before using it.

2. Perform a test area in an inconspicuous area of the surface, to determine product effectiveness and coverage.

3. Apply product from the spray bottle, or in larger applications from a low-pressure pump sprayer.  Make sure to cover the area to be cleaned with adequate material to fully wet the surface.

4. Let Mighty Indigo work on the surface for 5-10 minutes (do not allow Mighty Indigo to completely dry on the surface).

5. Areas with heavy concentrations of grime or mold and mildew may require a second application and light scrubbing to remove all the surface contaminants.

6. In small areas (tile counters, floors, showers, etc.) rinse the surface if possible with clean water.  If rinsing is not feasible then wipe the surface after cleaning with a clean cloth and warm water.  In large areas, or in outdoor/industrial applications rinse the surface thoroughly with a hose or high-pressure washer ( 2500 to 4000 psi rinse is most effective in large applications)

Precautions

1. May cause minor skin irritation with prolonged contact.

2. Avoid prolonged contact with aluminum or magnesium as minor corrosion may result.

3. Do not take internally

4. Should not be allowed to dry on glass (may leave a film if not properly rinsed)

5. Avoid contact with eyes.

6. May affect the soundness of some paints

Additional Info

Mighty Indigo is a safe non-toxic and Bio-Degradable, and very low V.O.C.  It is effective where even harsher cleaners fail.

Downloads

• Material Safety Data Sheet (MSDS)
• Technical Data Sheet