CBR - Cut Back Remover
CBR Cut Back Remover is a strong non-abrasive old cutback removal formulation. Works hard as an emulsifier for the easy take-away of cutback. It is water based with NO HARSH CHEMICALS or SOLVENTS. Low VOC and biodegradable. Easy to use surface prep.
Read entire label before using. Use only as directed. Before applying, it is recommended that preliminary tests be carried out to determine usage and to test the effectiveness of the treatment. Apply solution liberally on surface to be prepped with a low pressure garden style pump sprayer or a plastic sprinkling can. Use a stiff bristled brush (nylon deck brushes are suggested) to lightly spread product evenly over the surface, and allow solution to dwell for 10 minutes. After 10 minutes, agitate the surface with the stiff bristled brush in a back and forth motion going north to south and then east to west to assure complete surface agitation; areas of heavy buildup may require the use of a floor scraper to loosen thicker material. Allow the agitated solution to dwell on the surface an additional 10 minutes and rinse thoroughly. Allow surface to completely dry before analyzing results. Repeat process as needed.
Do not allow to dry on the surface. Protect all adjacent surfaces from overspray. Thoroughly rinse product from surrounding vegetation. CBR IS NOT MEANT TO BE AN ALTERVATIVE TO ASBESTOS MITIGATION. IF YOU ARE REMOVING AN ASBESTOS BASED ADHESIVE, FOLLOW PROPER ASBESTOS MITIGATION PROCEDURES. While CBR is a safe product, it is still an aggressive cleaner. Long sleeves and gloves should be worn during application. Where spray back is possible eye protection should be worn. Should not be taken internally. Use in a well ventilated area. CBR is a safe effective cleaner with very low V.O.C.’s. It is water-based, environmentally friendly and Bio-Degradable. KEEP OUT OF REACH OF CHILDREN.